Ccna 1 Chapter 5 Exam Answers links:
[FREE] Ccna 1 Chapter 5 Exam Answers
Posted on 17-Mar-2021
Which statement describes the treatment of ARP requests on the local link? They must be forwarded by all routers on the local network. They are received and processed by every device on the local network. They are received and processed only by the...
[ VIEW ANSWER ] [ Find Similar ]
[DOWNLOAD] Ccna 1 Chapter 5 Exam Answers | HOT
Posted on 26-May-2021
The switch sends the packet only to the host D, which in turn responds. Every other host connected to the switch receives the broadcast and host D responds with its MAC address. True or False? When a device is sending data to another device on a...
[ VIEW ANSWER ] [ Find Similar ]
CCNA 1 V5 Introduction To Networks Chapter 5 Exam Answers 2014
Posted on 4-May-2021
The cyclic redundancy check CRC part of the trailer is used to determine if the frame has been modified during transit. Two types of cut-through switching methods are fast-forward and fragment-free. What is auto-MDIX? When a device is sending data to another device on a remote network, the Ethernet frame is sent to the MAC address of the default gateway. When data is destined for a remote network of any type, the data is sent to the default gateway device, the Layer 3 device that routes for the local network. The ARP table in a switch maps which two types of address together?
[ VIEW ANSWER ] [ Find Similar ]
CCNA 4 V6.0
Posted on 6-Mar-2021
They are received and processed only by the target device. Explanation: One of the negative issues with ARP requests is that they are sent as a broadcast. This means all devices on the local link must receive and process the request. What are two potential network problems that can result from ARP operation? Choose two. On large networks with low bandwidth, multiple ARP broadcasts could cause data communication delays. Large numbers of ARP request broadcasts could cause the host MAC address table to overflow and prevent the host from communicating on the network. Explanation: Large numbers of ARP broadcast messages could cause momentary data communications delays. ARP table overflows are very unlikely. Multiple ARP replies resulting in the switch MAC address table containing entries that match the MAC addresses of connected nodes and are associated with the relevant switch port are required for normal switch frame forwarding operations.
[ VIEW ANSWER ] [ Find Similar ]
CCNA 1 V5 Introduction To Networks Exam Answers
Posted on 13-Apr-2021
The cyclic redundancy check CRC part of the trailer is used to determine if the frame has been modified during transit. Two types of cut-through switching methods are fast-forward and fragment-free. What is auto-MDIX? True or False? When a device is sending data to another device on a remote network, the Ethernet frame is sent to the MAC address of the default gateway.
[ VIEW ANSWER ] [ Find Similar ]
CCNA 1 Chapter 5 Exam Answers 2021 V6.0
Posted on 23-Mar-2021
When data is destined for a remote network of any type, the data is sent to the default gateway device, the Layer 3 device that routes for the local network. The ARP table in a switch maps which two types of address together? These mappings can be learned by the switch dynamically through ARP or statically through manual configuration. Refer to the exhibit. CCNA 1 v6. In this scenario, what will happen next? Explanation: When a network device wants to communicate with another device on the same network, it sends a broadcast ARP request. In this case, the request will contain the IP address of PC2. The ARP table for host A is shown. What happens when host A wants to send an IP packet to host D? Host A sends out the packet to the switch. The switch sends the packet only to the host D, which in turn responds. Every other host connected to the switch receives the broadcast and host D responds with its MAC address.
[ VIEW ANSWER ] [ Find Similar ]
CCNA 1 (v + V) Chapter 5 Exam Answers For Ethernet - Config Router
Posted on 5-Apr-2021
On a Cisco switch, port-based memory buffering is used to buffer frames in queues linked to specific incoming and outgoing ports. Match the characteristic to the forwarding method. Not all options are used. A cut-through switch can forward frames before receiving the destination address field, thus presenting less latency than a store-and-forward switch. Because the frame can begin to be forwarded before it is completely received, the switch may transmit a corrupt or runt frame. All forwarding methods require a Layer 2 switch to forward broadcast frames. New Questions What is the minimum Ethernet frame size that will not be discarded by the receiver as a runt frame?
[ VIEW ANSWER ] [ Find Similar ]
CCNA 4 V Chapter 5 Exam Answers PDF | 1medicoguia.com
Posted on 8-May-2021
The switches are new and have never been configured. Which three statements are correct about the final result of the connection? Choose three. The auto-MDIX feature will configure the interfaces eliminating the need for a crossover cable. The duplex capability has to be manually configured because it cannot be negotiated. If both switches support different speeds, they will each work at their own fastest speed. The link between switches will work as full-duplex. In this scenario, what will happen next?
[ VIEW ANSWER ] [ Find Similar ]
No comments:
Post a Comment